-
Sub-Total : $0
Total : $0
Mains Motor and Lamp Controller 1.00 pc
$53.95
This power control module by German brand Kemo Electronics can be used for various mains rated applications including lamp dimming, soldering iron temperature adjustment and slow start up speed on motors.
Car Radio Suppressor 1.00 pc
$5.95
CAT.NO: AA3060
Description
1 Year WarrantyTraditional condenser type.
10A DC Noise Filter (Improved) 1.00 pc
$16.95
The interference or electronic noise generated by motors, alternators and more can manifest as popping or static sound in CB radios as well as stereo systems. If that sounds familiar, then this filter is your solution.
Line Level Control (Attenuator) 1.00 pc
$12.95
A 12V 2 channel line output converter to provide your vehicle audio system with a safer, dedicated low-level line signal from your source.
Ground Loop Isolator (Stereo) RCA 1.00 pc
$16.75
These ground loop isolators prevent unwanted noise that a car alternator creates from manifesting as humming, hissing, and buzzing through your car audio systems.
Ground Loop Noise Isolator (Stereo) 3.5mm 1.00 pc
$13.95
These ground loop isolators prevent unwanted noise that a car alternator creates from manifesting as humming, hissing, and buzzing through your car audio systems.
TO-220 Mini (6073B Type) Heatsink 1.00 pc
$1.75
- Thermal resistance 20°C/W- Equivalent to popular 6073 type...
TO-220 Clip-on Heatsink (6043 Type) 1.00 pc
$1.85
The heatsink will just clip over a device when required for permanent or temporary installation.- Thermal resistance 30° C/W...
TO-220 Heatsink (6021 Type) 1.00 pc
$1.85
- Thermal resistance 12°C/W.Solderable PCB mounting pins...
TO-220 Heatsink 1.00 pc
$2.30
These PCB mount heatsinks have two tinned pins to aid in fastening the sink to a board or surface.
PC Mount TO-3P Heatsink - 25mm High 1.00 pc
$2.60
Will accept up to TO-3P size flat pack transistors. (This includes TO-220).Includes 2 PC pins, which help stabilise the heatsink.
PC Mount TO-3P Heatsink - 40mm High 1.00 pc
$2.95
Will accept up to TO- 3P size flat pack transistors. (This includes TO-220). Includes 2 PC pins, which help stabilise the heatsink.
Heavy Duty TO-3P Heatsink (ML97 Type) 1.00 pc
$4.20
Heavy duty version of the PC mount TO-3P heatsinks.- Solderable screw studs.
Fan Assisted-Type Heatsink - 225mm Long 1.00 pc
$28.95
This heatsink is designed to mate with itself to form a tunnel. The heatsink extrusion has screw flute centre to enable 4 x No.6 self- tapping screw...
Fan Assisted-Type Heatsink - 254mm Long 1.00 pc
$32.95
This heatsink is designed to mate with itself to form a tunnel. The heatsink extrusion has screw flute centre to enable 4 x No.6 self- tapping screw...
Showing total 15 item(s)